860-960MHz 4dBi LoRa Antenna w/ Coax Cable & Suction Cap
All of our stock antennas are 4dBi. The length of the antenna is proportional to the wavelength of the frequency band. The frequency wavelength of 470 mHz is roughly twice that of 915 mHz, so proportionally, the CN 470 stock antenna is longer than the US/EU stock antenna.
NOTE: The antenna is waterproof and can be placed outdoors.
Electrical Specification |
||
General Parameters |
Operating Frequency / MHz |
860 - 960 |
Polarization / ° |
vertical |
|
Electrical Downtilt / ° |
0 |
|
Circuit Parameters |
Maximum Voltage Standing Wave Ratio |
1.5 |
Third-order Intermodulation / dBm, @2x43dBm |
/ |
|
Average Power Tolerance / W |
≥100 |
|
Impedance / Ω |
50 |
|
Radiation Parameters |
Horizontal Half Power Beam Width / ° |
360 |
Vertical Half Power Beam Width / ° |
60±10 |
|
Gain / dBi |
4 |
|
Ovality / dB |
±2 |
|
Sidelobe Suppression / dB |
≤-15 |
Mechanical Specification |
|
Connector Type |
RP-SMA-Female |
Antenna Size / mm |
Φ60*125 |
Package Size / mm |
subject to actual packaging |
Antenna Weight / kg |
0.13 |
Mounting Accessories Weight / kg |
/ |
Radome Material |
bronze |
Installation |
magnetic mount |
Wind Speed Limit / km/h |
60 |
Temperature / °C |
working: -40 ~ +60, limit: -55 ~ +75 |
Lightning Protection |
DC grounding |
Product Level |
Commercial V1.0 |
Comments
3 comments
I am trying to figure where to place my BobCat when it gets here, I need to know the length of the Antenna cable, please.
It's about 3 feet in length. If we can we can put the antenna outside, what is the temperature limitation of the Bobcat miner itself?
How to set the type of antenna in the Helium application by adding Bobcat Miner 300?
Please sign in to leave a comment.